Overview
The Server Information page in the Solutions Manager provides details about the Connected Server and allows you to manage the search locations for solution files, either through directly mapped folders or via a connected server.
It also enables you to configure security settings for the Local Computer.
On this page:
Table of Contents | ||||
---|---|---|---|---|
|
Anchor Server Workspace Server Workspace
Solutions Location
The list of solutions presented can include files from your local computer or connecting with a Solution Server running the TWebServices service. If you select Solution Server, you will need to specify the server address and connect to it.
To connect to a solution server, use the IP address and port of the target Solution Server. You may be required to enter an Access Key, which is the password defined on the target server. This configuration is available under Local Computer Management.
Local Computer Files
The Solutions exhibited in the Solution Selector list are the ones set in Local Search Folders when the application starts to run.
If you copy a new Solution (.tproj or .dbsln file) to a folder listed in Local Search Folders, it will not be exhibited in the Solution Selector until you click the Refresh button. To add or remove a folder from the search paths:
Click Find Solutions file.
Click Add Search Path to insert a new path;
Click Remove Search Path to remove a path.
Check Allow Remote Access and Allow Remote Run for multi-user development. (Optional)
Solution Server
To display the Solution List from a server running the TWebServices, the client computer must be connected to the Solution Server using its IP address and port.
If you have a computer where the solution files are stored and managed, and other computers from which you want to work remotely on those solution files, both computers must have the software platform installed and licensed. The client computer needs to connect to the solution server by using the IP address and port of the computer that stores the solutions. You can also connect to the solution server on your own computer using the IP address 127.0.0.1 and the port where the Solution Server is running. By default, the Solution Server runs on port 10108.
The TWebServices must be running to accept remote connections. See Service Verification for more information.
If using the Embedded Web Service (TWebService) platform, no configuration is required. If using Microsoft IIS web server, see Installing on Microsoft IIS.
Tip | ||
---|---|---|
| ||
When using Distributed Engineering, allowing users from remote computers to access the solution, you need to connect using the Solution Server instead of direct File Access. |
Connected Server Information
The Connected Server Information displays details such as the operating system, server URL, server IP, installed versions, and running services. By default, the SolutionServer operates on port 10108 and includes services like Hardkey and WebServices. Additionally, you can configure services (WebServices, MQTT Broker, and Hardkey) to start as Windows services.
Local Computer Management
The Local Computer Management defines an AccessKey to connect securely with the Solution Server hosted on the local computer, adding an extra security layer for remote access. It includes configuration fields for setting and verifying the AccessKey: the "Set AccessKey" field for entering the password and the "Verify" field for re-entering the password to confirm it. The "Apply" button saves the AccessKey settings.
Warning |
---|
Pressing "Apply" with any input removes the AccessKey. |
Finding Solutions Folders
After clicking Find Solutions in the Manager Workspace
This page presents the Project Server settings. To set it, click the Project Server icon in the Find Projects dynamic text box on the Project Management interface. Easy Heading Macro headingIndent 40 navigationTitle On this page selector h2,h3 wrapNavigationText true navigationExpandOption disable-expand-collapse
After clicking Find Projects in the Project Management interface, you will be addressed to the Project Server screenInformation, which allows to easily set a project solution to auto-startup and define if the Project Solution Selector list will exhibit projects Solutions from a local or remote computer.
Solution Server | |
---|---|
Field |
Description |
---|
Solutions list built from |
It shows the options below, where user can choose either if the |
Solution list will be built from local computer files or a server. |
Local Computer Files |
It sets Solution selector list to be built from the local computer. |
Solution Server |
It sets a server to build the |
Solution selector list from. |
Connect |
It connects to the |
Solution server set. |
Update... |
It updates Solution server status. |
Server Information |
It shows server IPs. |
Running Services |
It shows current server's running services. |
Local Search Folders |
Exhibit local folders set to search |
Solutions and the options below. |
Add Search Path |
It adds new local path to search for |
Solutions. |
Remove Search Path |
It removes a local path to search for |
Solutions. |
Visible | It shows the local paths in the Solution List, enabling you to select the solutions in the Manager workspace |
. |
Allow Remote |
For each search path you enable remote access, an extra layer of security can be added by defining the Virtual Path. This string works as a key required to access the project in that folder.
If the folder allows remote access and no virtual path is defined, any remote user connected to this server will have access to query projects from that folderIt enables remote access to the local paths set. |
Info |
---|
The platform will scan for .tproj dbSln files in the paths set. If the list is empty, check the search paths or the connection with the remote solution server. Also, try Creating a New ProjectSolution. If an error occurs when the project Solution is loading, a log is created at "C:\Users\Public\Documents\TLocalSettings\". |
TraceLogs" folder |
Anchor | ||||
---|---|---|---|---|
|
Folder Visibility and Remote Access configuration
Any folder included in Local Search Folders has controls for visibility and remote access.
Permissions for remote access are set by folder, so place your solutions in
Local Computer Files
The projects exhibited in the Project Selector list are the ones set in Local Search Folders when the application started to run.
If you copy a new project (.tproj file) to a folder listed in Local Search Folders, it will not be exhibited in the list immediately. It is necessary to click the Refresh button to refresh the list.
To add or remove a folder from the search paths:
Click Find Project... to display a list of existing search paths. If the Find Project... button is not visible, check the Project Server configuration and change it to Localhost;
- Add or remove paths from the search list;
- Define other search criteria below.
Project Server
Info | ||
---|---|---|
| ||
ProjectServer service must be running to accept the remote connections. If using the Embedded Web Server (TWebServer) platform, no configuration is required. If using Microsoft IIS web server, see Installing on Microsoft IIS. |
When connected to a remote computer, the Search Folders and allowing access to the projects shall be executed on the Remote Computer. <<<<??>>>>>
On the client side, it is only possible to connect to server and enter the Virtual Path key that defines which paths from the remote computer you have access.
The process to check if the remote Server meets all requirements to allow remote access is described in Project Server.
Info | ||
---|---|---|
| ||
For information about how to collaborate with other users during the project development, please check Multi-user Development. |
Allowing Remote Access
Any folder included on Local Search Folders can be enabled or not for Remote Access.
The permissions for remote users access is by folder, therefore place your projects on the folders accordingly. You can keep many projects solutions in one folder , or create a separate folder for each one.
To manage
remote access foryour
projectsSolutions Folders:
After adding a search path, select the one you would like to allow remote access.
Check
Allow Remote AccessVisible to enable remote access for selected folder.
Check Allow Remote Run to enable projects Solutions from selected folder to be run by remote users.
- If necessary, enter a Virtual Path.
Allowing Remote Run
- Add info about Remote Run
Info | ||
---|---|---|
| ||
For information about how to collaborate with other users during the Solution development, please check Multi-user Development. |
In this section
...:
Page Tree | ||||
---|---|---|---|---|
|