Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Refer to the User Manual for more information on the  Device Module or on Tag Providers.


...

Summary

Communication Driver Information
Driver nameMitsubishiFX_Serial
Assembly NameT.ProtocolDriver.MitsubishiFX_Serial
Assembly Version1.0.1.0
Available for LinuxFalse
Devices supported 

FX3U

ManufacturerMitsubishi
ProtocolProprietary
PC RequirementsStandard Serial Port


...

Supported Operands

Operand

Read

Write

Data Type

Address size

D - Data register

Yes

Yes

Word

2 bytes

TN – Timer Current value

Yes

Yes

Word

2 bytes

TS – Timer Contact

Yes

No

Bit

1 bit

CN – Counter Current value

Yes

Yes

Word

2 bytes

CS – Counter Contact

Yes

No

Bit

1 bit

X - Input relay

Yes

No

Bit

1 bit

Y - Output relay

Yes

Yes

Bit

1 bit

M - Internal relay

Yes

Yes

Bit

1 bit

S0 - Annunciator

Yes

Yes

Bit

1 bit

...

Channels Configuration

Protocol Options

  • Maximum size of blocks: Defines the maximum of addresses in a read block.

Protocol Options

  • Com – Define the Port of communication
  • Baud Rate – Define the rate at which information is transferred in a communication channel.
  • Databits – Define the number of data bits in each character
  • Parity – Define the method of detecting errors in transmission.
  • Stop bits – Define the stop bits.
  • DTR – Define a control signal in RS-232 serial communication.
  • RTS – Define the Request to Send
  • CTS – Define the Clear to Send
  • CtsWait – Time in milliseconds


...

Nodes Configuration

Primary Station 

  • SlaveID: The default is 1.


...

Points Configuration

The syntax for the Mitsubishi FX Serial communication points is: <Operand> <Address>

Where :

  • <Operand>: Represents the Device Memory :
  • <Address>: Address number

Operand

D - Data register

TN – Timer Current value

TS – Timer Contact

CN – Counter Current value

CS – Counter Contact

X - Input relay

Y - Output relay

M - Internal relay

S0 - Annunciator


Note: The Y Operand is an Octal Numeral System.


...


Driver Revision History

MitsubishiFX_Serial Revision History
Version Notes
1.0.1.0Initial release on new documentation standards