Page History
...
A connection links two elements through a connector polyline. Each connection stores:
Field | Description |
|---|---|
Guid | The unique identifier of the connected element |
Terminal | The terminal index on the connected element (which connection point was used) |
Point | The coordinate of the connection point relative to the connected element |
LineIndex | Indicates the direction: 1 = inbound (start of connector), 2 = outbound (end of connector) |
Connections are stored as a semicolon-delimited string in the EleDP.Connections attached property on each element. The system manages this data automatically when you create, edit, move, or delete connectors.
...
Inside a symbol, add small child elements (typically rectangles or ellipses) and set their Uid property to Node followed by a number:
Uid | Description |
|---|---|
| First terminal (typically the input or top connection point) |
| Second terminal (typically the output or bottom connection point) |
| Additional terminals as needed |
The connector system searches recursively through the symbol's child canvas for elements whose Uid starts with "Node". The center of each terminal element is used as the snap point.
...
Connector polylines have the following attached properties (defined in EleDP):
Property | Type | Description |
|---|---|---|
| Guid | Unique identifier for this element. Assigned automatically when the connector is created. |
| bool | Marks this polyline as a connector. Set to |
| string | Serialized connection data. Semicolon-delimited list of ConnectionInfo records. |
| Guid | Reference to a parent element (used for grouped connections). |
| Guid | Reference to a label/legend element associated with this connector or shape. |
The IsConnector checkbox is visible in the Properties panel when a polyline is selected. You can manually set any polyline as a connector.
...
Projects created in version 9.2 with connections are automatically updated when upgraded to version 10. The upgrade system maps the old property names to the new ones:
Version 9.2 | Version 10 |
|---|---|
|
|
|
|
|
|
|
|
|
|
No manual steps are required — the conversion is automatic on project open.