Page History

Configure MQTT Client

1. Navigate to Devices → Protocols
2. Select MQTT
3. Create channel:
   • Name: MQTTClient
   • Protocol: MQTT Client
4. Go to Device → Nodes
   1. Name: IoT_Sensors
5. Open PrimaryStation and configure:
   1. BrokerURL: 127.0.0.1
   2. Port: 502
   3. ClientID: FrameworX

Create Points

1. Navigate to Devices → Points
2. Add points for each expected topic:

Temperature Tank 1 Sensor:

• TagName: TankFarm/Tank1/Temp
• Node: IoT_Sensors
• Topic: TankFarm/Tank1/temperature
• Data Type: Double
• AccessType: Read

Temperature Tank 2 Sensor:

• Name: TankFarm/Tank2/Temp
• Node: IoT_Sensors
• Topic: TankFarm/Tank2/temperature
• Data Type: Double
• AccessType: Read

Temperature Tank 3 Sensor (write):

• Name: TankFarm/Tank3/Temp
• Node: IoT_Sensors
• Topic: TankFarm/Tank3/temperature
• Data Type: Double
• AccessType: Write

Test Connection

1. Start Runtime
2. Open Devices → Monitor
3. Use MQTT client tool (like MQTT Explorer) to:
   • Publish test messages
   • Verify FrameworX publishes

In this section...