Page History
| Page properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
SNMP supported devices
- Name: SNMP
- Version: 2.5.0.7
- Protocol: SNMP
- Interface: TCP/IP or UDP
- Runtime: .NET 2.0 (Multiplatform)
- Configuration:
- Devices / Protocols
On This Page
This document has only specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
:
| Table of Contents | |
|---|---|
|
|
Overview
Communication Driver Information | |
|---|---|
Driver name | SNMP |
Assembly Name | T.ProtocolDriver.SNMP |
Assembly Version | 2.5.0.7 |
Available for Linux | False |
Devices supported | SNMP supported devices |
Manufacturer | N/A (Not Applicable) |
Protocol | SNMP |
Interface | TCP/IP or UDP |
PC Requirements | Ethernet port |
Supported Operands
Get Command
Command | Description |
|---|---|
OctetString | FS Device DataType ASCII |
ObjectIdentifier | FS Device DataType ASCII |
TimeTicks | FS Device DataType ASCII |
Integer32 | FS Device DataType Long |
Gauge32 | FS Device DataType DWord |
Counter32 | FS Device DataType DWord |
Set Command
Command | Description |
|---|---|
OctetString | FS Device DataType ASCII |
Integer32 | FS Device DataType Long |
Counter32 | FS Device DataType DWord |
Nodes Configuration
Station Configuration
- <IP address>: IP address of the equipment in the network
- <Port>: Port of the equipment in the network
- <MIB>: MIB file of equipment. If the MIB file is not specified the SNMPv2-MIB file will be used.
- <Version>: Version of the SNMP
- <Authentication>: Authentication MD5 or SHA-1. Only for Version 3.
- <Passphrase>: Passphrase when Authentication is enabled.
- <Privacy>: Privacy DES or AES. Only for Version 3 and Authentication is enabled.
- <Passphrase>: Passphrase when Privacy is enabled.
- <UserName>: UserName for version 3.
Points Configuration
The syntax for the SNMP communication points is: [Community name]; <OID>
Where:
- [Community name] can be:
- Public (default)
- Private
- <OID>: indicates the Object Identifier (OID) in the verbose notation. You can use the TreeView to select the OID from MIB.
E.g.: .iso.org.dod.internet.mgmt.mib-2.transmission
Driver Revision History
SNMP Revision History | |
|---|---|
Version | Notes |
2.5.0.7 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|