Page History
| Page properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
TTS08 family devices
- Name: TTS08
- Version: 1.1.0.1
- Protocol: Proprietary
- Interface: TCP/IP
- Runtime: .NET 2.0 (Multiplatform)
- Configuration:
- Devices / Protocols
On This Page
This document has only specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
:
| Table of Contents | |
|---|---|
|
|
Overview
Communication Driver Information | |
|---|---|
Driver name | TTS08 |
Assembly Name | T.ProtocolDriver.TTS08 |
Assembly Version | 1.1.0.1 |
Available for Linux | False |
Devices supported | TTS08 family devices |
Manufacturer | McCoy Global |
Protocol | The SD50 is a TCPIP server that supplies a binary encoded sensor data stream on port 9876 and listens for parameter tare commands on port 9976 |
Interface | TCP/IP |
PC Requirements | Ethernet port |
Channel Configuration
Protocol Options
Not used in this driver.
Settings
- AcceptUnsolicited must be checked.
Node Configuration
Station Configuration
Station syntax: <IP> ; <Port>
Where:
- <IP>: SD50 IP Address
- <Port>: 9876 must be set to receive the data stream.
Points Configuration
Address
The syntax for the TTS08 communication points is: <SensorTxId>:<ItemID>
Where:
- <SensorTxId>: Sensor TxId in Hexa.
- <ItemID>: Specific item to be read, such as:
- Battery
- Pressure
- Tension
- Torque
- Temperature
- X_Axis_Acceleration
- Y_Axis_Acceleration
- Z_Axis_Acceleration
- RPM
Driver Revision History
TTS08 Revision History | |
|---|---|
Version | Notes |
1.1.0.1 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|