This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
On this page:
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
Communication Driver Information
Driver name
AB ENI
Assembly Name
T.ProtocolDriver.ABENI
Assembly Version
PLC Allen-Bradley MicroLogix 1761 - NET-ENI
Driver Name: ABENI
Version: 1.0.0.1
Available for Linux
False
Devices supported
PLC Allen-Bradley MicroLogix 1761 - NET-ENI
Manufacturer
Rockwell
Multiplatform runtime
Modules: Device
Manufacturer: Allen-Bradley / Rockwell
Protocol:
Protocol
AB_ENI
PC Requirements: Ethernet port
On This Page:
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
This document has only information about the device connection settings and its address syntax.
For further Information, see:
Ethernet boardThis configuration is not supported for this Driver.
Station syntax: <IP > ; <Port >
Where:
<IP> = IP address of the slave device in the AB network
<Port> = TCP port where the slave device is listening (default is 44818)
E.g.: 192.168.1.1 ; 44818
The syntax for the AB ENI communication points are:
Where <FileType> indicates the memory area, the valid values are:
AB ENI Address Types | ||||
---|---|---|---|---|
Type | Read | Write | Data Type | Address size |
N | Yes | Yes | Word | 2 bytes |
B | Yes | Yes | Word | 2 bytes |
F | Yes | Yes | Single | 4 bytes |
S | Yes | Yes | Word | 2 bytes |
<FileNumber> indicates the data address for the chosen file
<ElementNumber> indicates the address from the specific file which will read and/or write from PLC.
<Parameter> indicates the parameter that composes the ElementNumber.
E.g.:
AB ENI Revision History | |
---|---|
Version | Notes |
1.0.0.1 | Initial release on new documentation standards |
Page Tree | ||||
---|---|---|---|---|
|