This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
On this page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Summary
Communication Driver Information | |
|---|---|
Driver name | CST - CSI Server |
Assembly Name | T.ProtocolDriver.CSI |
Assembly Version | 1.0.0.8 |
Available for Linux | True |
Devices supported | Any device compatible with CST Protocol |
Manufacturer | n/a |
Protocol | TCP/IP |
PC Requirements | Ethernet port |
Nodes Configuration
Station Configuration
TCP/IP channels:
- Stations syntax: < UnitName >
Where :
- < UnitName > = Unit Name in the Server
Points Configuration
The syntax for the CSI communication points is: <PointName>:<Parameter>
Where:
- < PointName > Point Name in the Server.
- <Parameter> Parameter of the Point Name to fill the Tag. It can be:
GAIN
OFFSET
RAW_VALUE
TYPE
UNITS
VALUE
e.g: Temp.VALUE
Driver Revision History
CSI Revision History | |
|---|---|
Version | Notes |
1.0.0.8 | Initial release on new documentation standards |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|